Keyboard not work
  • Make sure that the keyboard is turned on
  • Make sure it is fully charged
  • The charging cable does not make the keyboard work as a wired.
 
How to pair
1) Turn the keyboard on
2) Go to System Preference/Settings then click on Bluetooth
3) Hold the B1 button on the top right of the keyboard for 2 seconds.
4) The B1 LED will turn Red (Blinking) B2 and B3 will be a different color.
5) Click/Press connect when the keyboard is found under a nearby device.
 
Keyboard Set up Assistant (For Apple Computers Only)
1) A keyboard set-up assistant will pop up. If not go to settings > keyboard > press Change keyboard type.
2) Click on continue and press the letter Z one time
3) Click on the ?/ key one time.
4) Click on ANSI, then click on Done.
 
Changing the Channel
  • Press B1 one time; Do not hold it. (Holding the B1 button will make it lose connection. If it happens, the keyboard will need resyncing.
  • Press B2 one time; Do not hold it. (Holding the B2 button will make it lose connection. If it happens, the keyboard will need resyncing.
  • Press B3 one time; Do not hold it. (Holding the B3 button will make it lose connection. If it happens, the keyboard will need resyncing.
 
Backlight
  • F5 is to make the backlight on the keyboard dimmer.
  • F6 is to make the backlight on the keyboard brighter.
 
Sleep time?
  • This is for battery consumption
  • Brightest level - 30 seconds
  • Medium level - 60 seconds
  • Low level - 120 seconds
 
Bluetooth sleep time
  • 2 hours when not in use.
 
Battery time
  • 1-2 weeks when the backlight is on due to high battery consumption
  • 3-5 months if the backlight is off due to low battery consumption